What we do

Why MaxiFlox® and MaxiDry® is better

Our unique combination of proprietary research and specialised manufacturing enables us to deliver site-specific products in relatively short times.

MaxiFlox® and MaxiDry® products are supplied in and liquid form, as well as an extensive range of molecular weights, charge distributions and charge densities. Each solution is tailored to address the unique challenges of each client’s site makeup conditions and at the final application stage.

Our coagulant has been specially formulated to deliver the maximum benefit when applied with our OptiFlox® control technology across most mineral processing applications. It provides highly effective performance at a reduced treatment cost - in some cases up to 30% lower than
products on the market.

Products include:

• MaxiFlox® organic liquid coagulants (based on synthetic organic monomers & naturally occurring polysaccharides)
• MaxiFlox® inorganic liquid coagulant blends
• MaxiFlox® cationic & anionic flocculant emulsions
• MaxiFlox® cationic & anionic flocculant powders
• MaxiFlox® mud solidification polymers
• MaxiFlox® antifoam products
• MaxiDry® filter aids

We bring a significant depth of technical knowledge of underlying chemistry and wastewater treatment processes. This has been gained through our extensive in-house R&D of monomers and unique proprietary polymerisation technologies, as well as through our technical representatives’ extensive experience in the field solving wastewater treatment problems.

OptiFlox®, leading edge process control technology 

These Slik friction reduction products are based on fast-hydrating, highly-active AMPS co-polymer and are available in dry and liquid blended slurries for additional functionality:

DrySlik

• Reduces friction by up to 80%
• Smaller particle size hydrates rapidly even in low temperature
• Dramatically reduces the need for freshwater
• Tolerates high temperatures
• Simple equipment set up, requiring a dry feed system
• Eliminates hydration unit and reduces trucking and driver time requirements by as much as 85%
• Eliminates hazardous solvents when combined with our custom non-emulsification chemistry

WetSlik

• Available at concentrations between 1-4lbs/gal
• Highly concentrated form reduces trucking and driver time expense
• Tolerant to saltwater
• Low-dose liquid concentrates with up to 4.5ppg of polymer

CarrySlik

• Proppant suspension thanks to viscosity through blend with guar
• Reduces friction by up to 80%
• Smaller particle size hydrates rapidly even in high-salinity brines
• Dramatically reduces the need for freshwater

What is TrueMud^TM Technology?

• A process that uses controlled cavitation
• Closed boreholes around the rotor’s circumference create a pressure differential within the fluid
• Centrifugal force causes bubbles to form and then to collapse
• Collapsing bubbles generate shockwaves that heat, concentrate, and intimately mix – similar and/or dissimilar materials

Why is TrueMud^TM superior over conventionally-mixed muds?
Think surface area. Crushed ice chills water much faster than ice cubes because crushed ice puts more surface area in contact with the water. The same principle holds true with TrueMud^TM mixing. Increasing surface area yields better performance.